Wolf Motor Oil Essential SN/CF 5W-40 Engine Oil 5ltr
Wolf Essential SN/CF 5W-40 is a full synthetic engine lubricant formulated to meet the demanding requirements of modern vehicle manufacturers. Its advanced formulation provides excellent low-temperature fluidity, reduced resistance during engine starting, and high thermal stability for reliable engine protection.
Suitable for petrol and diesel engines, including turbocharged and direct-injection applications, this oil is designed to provide dependable lubrication and support extended oil-drain intervals where permitted by the vehicle manufacturer's service requirements.
Key Features:
✔ Full Synthetic Lubricant – Advanced synthetic formulation for enhanced engine protection and performance.
✔ Excellent Low-Temperature Fluidity – Helps provide rapid oil circulation during cold starts.
✔ Low Starting Resistance – Supports easier engine starting in low-temperature conditions.
✔ High Thermal Stability – Maintains effective lubrication at elevated operating temperatures.
✔ Petrol & Diesel Compatible – Suitable for gasoline and diesel engines, including turbocharged and direct fuel-injection applications.
✔ Extended Drain Capability – Formulated to support extended oil-drain intervals where specified by the vehicle manufacturer.
✔ High Viscosity Index – Viscosity Index of 178 provides stable viscosity across a broad temperature range.
Product Specifications:
- Brand: Wolf
- Product: Essential SN/CF 5W-40
- Oil Type: Full Synthetic Lubricant
- Viscosity: SAE 5W-40
- ACEA: A3/B3-16, A3/B4
- API: SN/CF
- Mercedes-Benz: MB 229.1
- Volkswagen: VW 502 00
- Volkswagen: VW 505 00
Typical Characteristics:
| Property | Test Method | Unit | Average Result |
|---|---|---|---|
| Density at 15°C | ASTM D4052 | g/ml | 0.852 |
| Kinematic Viscosity at 40°C | ASTM D445 | mm²/s | 80.0 |
| Kinematic Viscosity at 100°C | ASTM D445 | mm²/s | 13.8 |
| Viscosity Index | ASTM D2270 | — | 178 |
| Base Number (BN) | ASTM D2896 | mg KOH/g | 10.1 |
| Pour Point | ASTM D6892 | °C | -42 |
| Sulfated Ash | ASTM D874 | Mass % | 1.1 |
| Flash Point (COC) | ASTM D92 | °C | 222 |
Application
Wolf Essential SN/CF 5W-40 is designed for petrol and diesel engines, including turbocharged and direct fuel-injection engines, where the vehicle manufacturer specifies SAE 5W-40 and the applicable ACEA/API or manufacturer specification.
The high-quality formulation can support extended oil-drain intervals, provided these intervals are specifically permitted by the vehicle manufacturer.
Always verify the required oil specification and service interval for the individual vehicle before use.
Installation / Usage Notes:
- Confirm the vehicle manufacturer's required viscosity and oil specification before use.
- Use the correct oil quantity specified for the engine.
- Replace the oil filter during a complete oil service.
- Extended drain intervals should only be used where permitted by the vehicle manufacturer.
- Do not mix different oil specifications unless approved by the manufacturer.
- Check the oil level after filling and allow the engine to settle before taking the final reading.
- Store sealed oil in a cool, dry location away from excessive heat.
- Dispose of used engine oil responsibly according to local environmental regulations.
- layers Catalog
- New in