Nissan NP200 Micra Renault Clio Megane Modus 260mm Vented Front Brake Disc Set

Nissan & Renault Front Brake Disc 260mm is a replacement vented front brake disc designed for selected Nissan Micra, Nissan NP200, Renault Clio III, Renault Megane II and Renault Modus / Grand Modus models equipped with the corresponding front braking system.

The brake disc features an outer diameter of 260mm, a nominal disc thickness of 22mm and a minimum permissible thickness of 20mm. Its vented construction assists with heat dissipation during braking, helping maintain consistent braking performance and temperature control.

The disc features a 4 x 100mm wheel bolt pattern, 61mm centering diameter, two mounting bores and a coated surface for additional protection.

Suitable applications include selected Nissan Micra III (K12), Micra V (K14), Nissan NP200, Renault Clio III (BR0/1, CR0/1), Renault Megane II (BM0/1, CM0/1) and Renault Modus / Grand Modus (F/JP0) models.

Key Features:

✔ Nissan & Renault Application – Suitable for selected Nissan and Renault passenger and light commercial vehicles.
✔ 260mm Outer Diameter – Manufactured for applications requiring a 260mm front brake disc.
✔ 22mm Brake Disc Thickness – Nominal new brake disc thickness of 22mm.
✔ 20mm Minimum Thickness – Specified minimum permissible brake disc thickness of 20mm.
✔ Vented Brake Disc – Internal ventilation assists with heat dissipation during braking.
✔ Front Axle Application – Designed for installation on the applicable front braking system.
✔ 4 x 100mm PCD – Features four wheel holes with a 100mm bolt hole circle diameter.
✔ 61mm Centering Diameter – Manufactured with the required 61mm centering diameter.
✔ Coated Surface – Protective coated finish helps protect applicable surfaces against corrosion.
✔ Two Mounting Bores – Features two mounting bores according to the specified brake disc design.
✔ 44mm Overall Thickness / Height – Manufactured to the specified overall dimension.
✔ Nissan NP200 Compatible – Suitable for selected NP200 applications equipped with this braking system.
✔ Nissan Micra Compatible – Covers selected Micra III K12 and Micra V K14 applications.
✔ Renault Clio III Compatible – Suitable for selected BR0/1 and CR0/1 chassis applications.
✔ Renault Megane II Compatible – Suitable for selected BM0/1 and CM0/1 chassis applications.
✔ Renault Modus Compatible – Covers selected Modus and Grand Modus F/JP0 applications.
✔ Direct Replacement Application – Designed to replace the corresponding original brake disc where vehicle fitment and dimensions match.

Product Specifications:

Vehicle Brands: Nissan / Renault
Product: Front Brake Disc
Product Type: Disc Brake Rotor
Fitting Position: Front Axle
Brake Disc Type: Vented
Outer Diameter: 260mm
Brake Disc Thickness: 22mm
Minimum Brake Disc Thickness: 20mm
Overall Thickness / Height: 44mm
Bolt Hole Circle / PCD: 100mm
Centering Diameter: 61mm
Rim Hole Number: 4
Number of Mounting Bores: 2
Surface: Coated
Service Information: Observe applicable service information

Vehicle Compatibility:

Suitable for selected Nissan and Renault vehicles equipped with the applicable 260mm vented front brake disc:

NISSAN

Nissan Micra III (K12) – 2003–2011

1.4 16V (CR14DE) - 65 kW / 88 HP
1.5 dCi (K9K 722) - 60 kW / 82 HP

Nissan Micra V (K14) – 2018–2022

0.9 IG-T (H4B 408|HR09DET) - 66 kW / 90 HP
1.0 DIG-T 117 (HR10DDT) - 86 kW / 117 HP

Nissan NP200 – 2008–2026

1.5 dCi (K9K 796) - 63 kW / 86 HP
1.6 (K7M 710) - 64 kW / 87 HP
1.6 16V (K4M) - 77 kW / 105 HP

RENAULT

Renault Clio III (BR0/1, CR0/1) – 2005–2026

1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11) (D4F 740) - 55 kW / 75 HP
1.2 16V (D4F 764) - 43 kW / 58 HP
1.4 16V (K4J 780) - 72 kW / 98 HP
1.5 dCi (BR0H, CR0H, CR1S, BR1S) (K9K 764) - 78 kW / 106 HP
1.5 dCi (K9K 750) - 60 kW / 82 HP
1.5 dCi (K9K 752|K9K 768) - 48 kW / 65 HP
1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,... (K4M 800|K4M 801) - 82 kW / 112 HP

Renault Megane II (BM0/1, CM0/1) – 2002–2011

1.4 16V (BM0B, CM0B) (K4J 730|K4J 740) - 72 kW / 98 HP

Renault Modus / Grand Modus (F/JP0) – 2004–2026

1.2 (JP0C, JP0K, FP0C, FP0K, FP0P, JP0P, JP0T) (D4F 740) - 55 kW / 75 HP
1.4 (JP01, JP0J) (K4J 770|K4J 780) - 72 kW / 98 HP
1.6 (JP03, JP0B, JP0U, JP0Y, JP1G) (K4M 790|K4M 791|K4M 800|K4M 801) - 82 kW / 112 HP

Installation:

Brake disc replacement should be carried out by a suitably qualified automotive technician.

When replacing the front brake discs, the complete braking system should be inspected, including:

• Front brake pads
• Brake calipers
• Caliper guide pins and boots
• Brake hoses
• Wheel hubs and bearings
• Brake disc mounting surfaces
• Brake fluid condition

The wheel hub mounting surface should be properly cleaned before fitting the replacement brake disc. Corrosion, dirt or debris trapped between the hub and disc can contribute to excessive disc runout and subsequent brake vibration.

Replacement Recommendation:

Front brake discs should normally be replaced in pairs across the same axle.

The front brake pads should also be inspected when fitting new brake discs. Pads that are significantly worn, unevenly worn, contaminated or damaged should be replaced as required.

Replacing braking components appropriately across the axle helps maintain balanced and predictable braking performance.

Bedding-In:

New brake discs and brake pads require an appropriate bedding-in period following installation.

During the initial bedding-in period, avoid unnecessary repeated heavy braking or prolonged braking wherever safely possible.

Correct bedding-in helps establish an even contact surface between the brake pads and discs and supports consistent braking performance.

Important Notes:

Front Axle Application: Designed for the front axle of compatible Nissan and Renault vehicles.

Vented Brake Disc: This is a vented, not solid, brake disc.

Coated Surface: Supplied with a coated surface according to the listed specification.

Multiple Brake Configurations: Some of the listed vehicles may use different brake disc sizes depending on engine, model variant, production date and braking system.

VIN Verification Recommended: Where there is uncertainty regarding fitment, provide the vehicle VIN before ordering.

Pair Replacement Recommended: Front brake discs should generally be replaced as an axle pair.

Professional Installation Recommended: Brake components are safety-critical and should be installed and inspected by a suitably qualified automotive technician.