Kia Picanto Hyundai i10 Grand i10 241mm Vented Front Brake Disc Set
Kia Picanto & Hyundai i10 Front Brake Disc 241mm is a replacement vented front brake disc designed for selected Kia Picanto, Hyundai i10 and Hyundai Grand i10 models equipped with the corresponding front braking system.
The brake disc features an outer diameter of 241mm, a nominal disc thickness of 18mm and a minimum permissible thickness of 16mm. Its vented construction assists with heat dissipation during braking, helping maintain consistent braking performance and temperature control.
The disc features a 4 x 100mm wheel bolt pattern, 62mm centering diameter and a coated surface for additional protection during storage and installation.
Suitable applications include the Kia Picanto I, Kia Picanto II, Hyundai i10 I and Hyundai Grand i10 II where the corresponding 241mm front braking system is fitted.
Sold as a set
Key Features:
✔ Kia & Hyundai Application – Suitable for selected Kia Picanto and Hyundai i10 / Grand i10 models.
✔ 241mm Outer Diameter – Manufactured for applications requiring a 241mm front brake disc.
✔ 18mm Brake Disc Thickness – Nominal new disc thickness of 18mm.
✔ 16mm Minimum Thickness – Specified minimum permissible brake disc thickness of 16mm.
✔ Vented Brake Disc – Internal ventilation assists with heat dissipation during braking.
✔ Front Axle Application – Designed specifically for the applicable front braking system.
✔ 4 x 100mm PCD – Features four wheel holes with a 100mm bolt hole circle diameter.
✔ 62mm Centering Diameter – Manufactured with the required 62mm centre bore specification.
✔ Coated Surface – Protective coated finish helps protect applicable surfaces from corrosion.
✔ Two Mounting Bores – Features two mounting bores according to the specified disc design.
✔ 49mm Overall Thickness / Height – Manufactured to the specified overall dimension.
✔ Kia Picanto Compatibility – Suitable for selected first- and second-generation Picanto applications.
✔ Hyundai i10 Compatibility – Suitable for selected first-generation Hyundai i10 applications.
✔ Hyundai Grand i10 Compatibility – Suitable for selected Grand i10 II applications.
✔ Direct Replacement Application – Designed to replace the corresponding original brake disc where dimensions and vehicle fitment match.
Product Specifications:
Vehicle Brands: Kia / Hyundai
Product: Front Brake Disc
Product Type: Disc Brake Rotor
Fitting Position: Front Axle
Brake Disc Type: Vented
Outer Diameter: 241mm
Brake Disc Thickness: 18mm
Minimum Brake Disc Thickness: 16mm
Overall Thickness / Height: 49mm
Bolt Hole Circle / PCD: 100mm
Centering Diameter: 62mm
Rim Hole Number: 4
Number of Mounting Bores: 2
Surface: Coated
Service Information: Observe applicable service information
Vehicle Compatibility:
Suitable for selected Kia and Hyundai vehicles equipped with the applicable 241mm vented front brake disc:
KIA
Kia Picanto I (SA) – 2004–2011
1.0 (G3LA) - 49 kW / 67 HP
1.2 (G4LA) - 64 kW / 87 HP
Kia Picanto II (TA) – 2011–2018
1.1 (G4HG) - 49 kW / 67 HP
1.1 (G4HG) - 50 kW / 68 HP
1.2 (G4LA) - 57 kW / 78 HP
1.2 (G4LA) - 63 kW / 86 HP
HYUNDAI
Hyundai i10 I (PA) – 2008–2026
1.1 (G4HG) - 48 kW / 65 HP
Hyundai Grand i10 II (BA, IA) – 2013–2026
1.0 (G3LA) - 51 kW / 69 HP
1.2 (G4LA) - 65 kW / 88 HP
Installation:
Brake disc replacement should be carried out by a suitably qualified automotive technician.
When replacing the front brake discs, the complete braking system should be inspected, including:
- Front brake pads
- Brake calipers
- Caliper guide pins and boots
- Brake hoses
- Wheel hubs
- Wheel bearings
- Brake disc mounting surfaces
- Brake fluid condition
The wheel hub mounting surface should be properly cleaned before fitting the replacement disc. Rust, dirt or other contamination between the brake disc and hub can contribute to excessive disc runout and brake vibration.
Replacement Recommendation:
Front brake discs should normally be replaced in pairs across the same axle.
The front brake pads should be inspected at the same time. If the pads are significantly worn, unevenly worn, contaminated or damaged, replacement together with the new brake discs is recommended.
Using properly matched brake discs and pads helps maintain consistent braking performance across the front axle.
Bedding-In:
New brake discs and brake pads require an appropriate bedding-in period following installation.
During the initial bedding-in period, avoid unnecessary repeated heavy braking or prolonged braking wherever safely possible.
Correct bedding-in helps establish an even contact surface between the brake pads and discs and supports consistent braking performance.
Important Notes:
Front Axle Application: Designed for the front axle of compatible Kia and Hyundai vehicles.
Vented Brake Disc: This is a vented, not solid, brake disc.
Multiple Brake Configurations: Different brake disc sizes may be fitted depending on the exact model, engine, production date and market specification.
VIN Verification Recommended: Where there is uncertainty regarding fitment, provide the vehicle VIN before ordering.
Pair Replacement Recommended: Front brake discs should generally be replaced as an axle pair.
Professional Installation Recommended: Brake components are safety-critical and should be installed by a suitably qualified automotive technician.