Chery J3 Tiggo 4 Pro Omoda C5 263mm Solid Rear Brake Disc Set

Chery J3, Chery Tiggo 4 Pro & Omoda C5 Rear Brake Disc Set 263mm is a replacement solid rear brake disc designed for selected Chery and Omoda passenger vehicles equipped with the corresponding rear braking system.

The disc is suitable for installation on either side of the rear axle. Brake discs should normally be replaced in axle pairs to maintain balanced braking performance.

Key Features:

✔ Rear Axle Brake Disc – Designed for the rear braking system of compatible Chery and Omoda vehicles.
✔ 263mm Outer Diameter – Manufactured with a 263mm outside diameter for the applicable rear braking system.
✔ 9mm Disc Thickness – Correct nominal disc thickness for compatible applications.
✔ Solid Brake Disc – Solid rotor construction designed for the applicable rear axle braking system.
✔ 35mm Disc Height – Manufactured to the required overall brake disc height.
✔ Left or Right Side Fitment – Suitable for installation on either side of the rear axle.
✔ Chery J3 Compatible – Suitable for selected Chery J3 Hatchback models from 2011–2017.
✔ Chery Tiggo 4 Pro Compatible – Suitable for selected Tiggo 4 Pro models from 2019–2026.
✔ Omoda C5 Compatible – Suitable for selected Omoda C5 models from 2023–2026.
✔ SQRE4T15C Engine Application – Includes the Omoda C5 1.5 230T producing 115kW / 156HP.
✔ Multi-Model Application – One brake disc specification covers several Chery/Omoda applications where the corresponding braking system is fitted.
✔ Direct Replacement Application – Designed to replace the corresponding original rear brake disc when vehicle fitment and dimensions match.
✔ Suitable for Axle-Pair Replacement – Rear brake discs should generally be replaced on both sides of the axle.

Product Specifications:

Vehicle Brands: Chery / Omoda
Product: Rear Brake Disc
Product Type: Disc Brake Rotor
Fitting Position: Rear Axle
Side: Left or Right / Both Sides
Brake Disc Type: Solid
Outer Diameter: 263mm
Brake Disc Thickness: 9mm
Height: 35mm
Length: 265mm
Width: 265mm
Weight: 3.473kg
Application: Selected Chery J3, Chery Tiggo 4 Pro and Omoda C5 Models

Vehicle Compatibility:

Suitable for selected vehicles equipped with the applicable 263mm solid rear brake disc:

CHERY

Chery J3 Hatchback – 2011–2017

1.6 (SQR481F) - 88 kW / 120 HP
1.6 (SQRE4G16) - 93 kW / 126 HP

Chery Tiggo 4 Pro – 2019–2026

1.5 (SQRE4T15C) - 115 kW / 156 HP

Chery Tiggo 4 Pro – 2021–2026

1.5 (SQRE4G15B|SQRE4G15C) - 83 kW / 113 HP
1.5 T (SQRE4T15B|SQRE4T15C) - 108 kW / 147 HP

OMODA

Omoda C5 – 2023–2026

1.5 230T (SQRE4T15C) - 115 kW / 156 HP

Where there is any uncertainty regarding the braking system fitted to the vehicle, the existing brake disc dimensions and VIN should be checked before ordering.

Installation:

Brake disc replacement should be carried out by a suitably qualified automotive technician.

When replacing the rear brake discs, the complete rear braking system should be inspected, including:

• Rear brake pads
• Brake calipers
• Caliper guide pins and boots
• Parking brake components
• Brake hoses
• Brake disc mounting surfaces
• Wheel hubs and bearings
• Brake fluid condition

The wheel hub mounting surface should be thoroughly cleaned before the replacement brake disc is installed. Contamination, corrosion or debris between the hub and brake disc can contribute to excessive disc runout and brake vibration.

Replacement Recommendation:

Rear brake discs should normally be replaced in pairs across the same axle.

Replacing both rear brake discs helps maintain consistent braking characteristics between the left and right sides of the vehicle.

The rear brake pads should also be inspected during disc replacement. Pads that are excessively worn, unevenly worn, contaminated or damaged should be replaced as required.

Bedding-In:

New brake discs and brake pads require an appropriate bedding-in period after installation.

Correct bedding-in helps establish an even contact surface between the brake pad friction material and new brake disc.

Avoid unnecessary repeated heavy braking immediately after installation wherever safely possible.

Important Notes:

Rear Axle Application: Designed for the rear axle of compatible Chery and Omoda vehicles.

Both Sides: Suitable for either the left or right side of the rear axle where the listed application applies.

Solid Disc: This is a solid rear brake disc, not a vented brake disc.

263mm Diameter: Confirm that the vehicle requires a 263mm outer diameter rear brake disc.

9mm Thickness: Nominal brake disc thickness is 9mm.

Omoda C5 Engine Application: Listed Omoda C5 compatibility includes the SQRE4T15C 1.5 230T producing 115kW / 156HP.

Vehicle-Specific Fitment: Different brake components may be used depending on model, production date and vehicle specification.

VIN Verification Recommended: Where there is uncertainty regarding fitment, provide the vehicle VIN before ordering.

Professional Installation Recommended: Brake components are safety-critical and should be installed by a suitably qualified automotive technician.