Kia Picanto II TA 180mm Rear Brake Drum Set G3LA G4LA
Kia Picanto II Rear Brake Drum is a replacement rear brake drum designed for selected Kia Picanto II models manufactured from 2011 to 2018, including compatible 1.0L and 1.2L petrol engines.
Suitable for installation on either the left or right side of the rear axle, this brake drum covers selected Picanto applications equipped with the G3LA, G3LA and G4LA engine families, with power outputs ranging from 49kW / 67HP to 65kW / 88HP.
Key Features:
✔ Kia Picanto II Application – Designed for selected second-generation Kia Picanto models manufactured from 2011–2018.
✔ 180mm Inner Diameter – Manufactured for the applicable 180mm rear drum braking system.
✔ 220mm Outer Diameter – Overall outside diameter of 220mm.
✔ 182mm Maximum Reboring Diameter – Maximum specified brake drum reboring dimension is 182mm.
✔ 4 x 100mm Wheel Pattern – Features four rim holes with a 100mm bolt hole circle diameter.
✔ 62.5mm Centering Diameter – Designed with the required 62.5mm centre bore specification.
✔ Left or Right Rear Fitment – Suitable for either side of the rear axle.
✔ 1.0L Petrol Compatibility – Suitable for selected G3LA-powered Kia Picanto models.
✔ 1.2L Petrol Compatibility – Suitable for selected G4LA-powered Kia Picanto models.
✔ Two Mounting Bores – Features two mounting bores according to the specified brake drum design.
✔ 53.4mm Thickness – Manufactured to the required overall thickness specification.
✔ 35.7mm Width – Brake drum width of 35.7mm.
✔ Direct Replacement Application – Designed as a replacement for vehicles equipped with the corresponding rear drum braking system.
✔ Single Drum Supplied – Quantity is one brake drum per unit purchased.
Product Specifications:
Vehicle Brand: Kia
Product: Rear Brake Drum
Product Type: Drum Brake Component
Vehicle Platform: Picanto II (TA)
Fitting Position: Rear Axle Left / Rear Axle Right
Inner Diameter: 180mm
Maximum Brake Drum Reboring Diameter: 182mm
Outer Diameter: 220mm
Bolt Hole Circle / PCD: 100mm
Centering Diameter: 62.5mm
Rim Hole Number: 4
Number of Mounting Bores: 2
Thickness: 53.4mm
Width: 35.7mm
Quantity: 2 Brake Drums
Vehicle Compatibility:
Suitable for selected Kia Picanto II vehicles equipped with the applicable 180mm rear drum braking system:
Kia Picanto II (TA) – 2011–2018
1.0 (G3LA) – 49kW / 67HP
1.0 (G3LA) – 51kW / 69HP
1.2 (G4LA) – 63kW / 85HP
1.2 (G4LA) – 65kW / 88HP
Installation:
Brake drum replacement should be carried out by a suitably qualified automotive technician.
When replacing a rear brake drum, the complete rear drum braking system should be inspected, including:
- Brake shoes and friction linings
- Wheel cylinders
- Brake shoe return springs
- Retaining springs and hardware
- Brake adjuster mechanism
- Handbrake / parking brake mechanism
- Wheel hub and bearing components
- Brake hoses and pipes
- Brake fluid condition
Brake shoes that are excessively worn, contaminated, cracked or unevenly worn should be replaced as required.
Any leaking or seized wheel cylinders should also be repaired or replaced before the vehicle is returned to service.
Brake Drum Wear Limit:
The brake drum has a nominal 180mm inner diameter with a specified maximum reboring dimension of 182mm.
The drum should not be machined beyond the specified 182mm maximum diameter.
If the drum has reached or exceeded its permitted wear or machining limit, replacement is required rather than further machining.
Replacement Recommendation:
Rear brake drums should generally be inspected and serviced as an axle pair.
If one drum requires replacement due to excessive wear, damage or being beyond its permitted machining limit, the opposite drum should also be carefully measured and inspected.
Replacing brake components in matched axle pairs where appropriate helps maintain consistent braking characteristics between the left and right sides.
Important Notes:
Rear Axle Application: Suitable for the rear left or rear right position.
Quantity: This listing is for 1 brake drum.
180mm Drum: Confirm that the vehicle uses the applicable 180mm inner diameter rear brake drum.
Maximum Diameter: Maximum specified reboring dimension is 182mm.
4 x 100mm PCD: This brake drum uses a 4-hole, 100mm bolt circle configuration.
Engine Applications: Suitable for selected G3LA 1.0L and G4LA 1.2L Kia Picanto II applications.
Vehicle-Specific Fitment: Brake system specifications may vary according to production date, market and vehicle specification.
VIN Verification Recommended: Where there is uncertainty regarding fitment, please provide the vehicle VIN before ordering.
Professional Installation Recommended: Brake drums are safety-critical components and should be fitted and inspected by a suitably qualified automotive technician.