Chery Tiggo 4 Pro 283mm Vented Front Brake Disc Set 1.5 and 1.5T

Chery Tiggo 4 Pro Front Brake Disc 283mm is a replacement vented front brake disc designed for selected Chery Tiggo 4 Pro models equipped with 1.5L naturally aspirated and 1.5L turbocharged petrol engines.

Suitable for selected Chery Tiggo 4 Pro models from 2019 to 2026, including vehicles equipped with SQRE4G15B, SQRE4G15C, SQRE4T15B and SQRE4T15C engine codes.

This brake disc is fitted to the front axle on either the left or right side. Brake discs should normally be replaced in axle pairs to maintain balanced braking performance.

Key Features:

✔ Front Axle Brake Disc – Designed for the front braking system of compatible Chery Tiggo 4 Pro models.
✔ 283mm Outer Diameter – Manufactured with a 283mm outside diameter for the applicable braking system.
✔ 22mm Disc Thickness – Correct nominal disc thickness for compatible applications.
✔ Vented Brake Disc – Internal ventilation assists with heat dissipation during braking.
✔ 45mm Disc Height – Manufactured to the required overall brake disc height.
✔ Left or Right Side Fitment – Suitable for installation on either side of the front axle.
✔ 1.5L Engine Compatibility – Suitable for selected naturally aspirated 1.5L Tiggo 4 Pro applications.
✔ 1.5 Turbo Compatibility – Suitable for selected 1.5T Tiggo 4 Pro applications.
✔ Multiple Engine Codes – Covers SQRE4G15B, SQRE4G15C, SQRE4T15B and SQRE4T15C applications where the corresponding brake system is fitted.
✔ Vented Design for Improved Cooling – Helps dissipate heat generated between the brake pads and disc during braking.
✔ Direct Replacement Application – Designed to replace the corresponding original front brake disc when dimensions and vehicle fitment match.
✔ Suitable for Axle-Pair Replacement – Brake discs should generally be replaced on both sides of the same axle.

Product Specifications:

Vehicle Brand: Chery
Product: Front Brake Disc
Product Type: Disc Brake Rotor
Fitting Position: Front Axle
Side: Left or Right / Both Sides
Brake Disc Type: Vented
Outer Diameter: 283mm
Brake Disc Thickness: 22mm
Height: 45mm
Length: 285mm
Width: 285mm
Weight: 6.295kg
Application: Selected Chery Tiggo 4 Pro Models

Vehicle Compatibility:

Suitable for selected Chery Tiggo 4 Pro vehicles equipped with the applicable front braking system:

Chery Tiggo 4 Pro – 2019–2026

1.5 (SQRE4T15C) - 115 kW / 156 HP

Chery Tiggo 4 Pro – 2021–2026

1.5 (SQRE4G15B|SQRE4G15C) - 83 kW / 113 HP
1.5 T (SQRE4T15B|SQRE4T15C) - 108 kW / 147 HP

Installation:

Brake disc replacement should be carried out by a suitably qualified automotive technician.

When replacing the front brake discs, the complete braking system should be inspected, including:

• Front brake pads
• Brake calipers
• Caliper guide pins and boots
• Brake hoses
• Brake disc mounting surfaces
• Wheel hubs and bearings
• Brake fluid condition

The wheel hub mounting surface should be properly cleaned before installation to minimise the possibility of brake disc runout.

Brake pads should also be inspected and replaced where necessary.

Replacement Recommendation:

Brake discs should normally be replaced in pairs across the same axle.

Replacing only one front brake disc can result in differences in braking characteristics between the left and right sides.

Where the existing brake pads are significantly worn, unevenly worn, contaminated or damaged, replacing the brake pads together with the new discs is recommended.

Bedding-In:

New brake discs and brake pads require an appropriate bedding-in period following installation.

During the initial bedding-in period, avoid unnecessary repeated heavy braking or prolonged braking wherever safely possible.

Correct bedding-in helps establish an even contact surface between the brake pads and discs and supports consistent braking performance.

Important Notes:

Front Axle Application: Designed for the front axle of compatible Chery Tiggo 4 Pro vehicles.

Both Sides: The same brake disc specification can be used on the left or right side where the listed application applies.

Vented Disc: This is a vented, not solid, brake disc.

283mm Diameter: Confirm that the vehicle requires a 283mm outer diameter front brake disc.

22mm Thickness: Nominal brake disc thickness is 22mm.

Engine-Specific Compatibility: Listed applications include SQRE4G15B, SQRE4G15C, SQRE4T15B and SQRE4T15C engines.

Pair Replacement Recommended: For balanced braking performance, front brake discs should generally be replaced as an axle pair.

Professional Installation Recommended: Brake discs are safety-critical components and should be fitted and inspected by a suitably qualified technician.