BMW Front Brake Pad Set F20 F30 G20 F32

BMW Front Brake Pad Set manufactured using a low-metallic friction compound and designed for selected BMW 1 Series, 3 Series and 4 Series applications.

The pads are supplied with an anti-squeak plate and piston clip to support secure installation and help reduce unwanted brake noise. With ECE-R90 certification, the brake pads meet the European replacement brake-lining performance standard.

Key Features

✔ Front Axle Brake Pads – Designed for compatible BMW front braking systems.
✔ ECE-R90 Approved – Tested to the ECE-R90 replacement brake-lining standard.
✔ Low-Metallic Compound – Provides effective braking performance and heat resistance.
✔ Anti-Squeak Plate Included – Helps reduce brake noise and vibration.
✔ Piston Clip Included – Supplied with integrated fitting provision for compatible brake calipers.
✔ Vehicle-Specific Fitment Required – BMW brake configurations can differ according to model, engine, brake package and production specification.

Product Specifications

Product Type: Front Brake Pad Set
Fitting Position: Front Axle
Material: Low-Metallic
Height: 61.8 mm
Thickness: 18.2 mm
Width 1: 155.7 mm
Width 2: 156.8 mm
WVA Number: 25506
Test Mark: ECE-R90
Supplementary Equipment: Anti-squeak plate
Supplementary Equipment: Piston clip

Recommended Accessories / Reference Numbers

• 1 987 473 050
• 1 987 473 619
• 1 987 474 550
• 1 987 474 780

Compatibility

BMW 1 Series

1 Series (F20) – 2011–2019

120 d (B47 D20 A) - 140 kW / 190 HP
120 d (N47 D20 C) - 135 kW / 184 HP
120 i (B48 B20 A) - 135 kW/184 HP
120 i (N13 B16 A) - 130 kW / 177 HP

1 Series (F21) – 2011–2026

118 i (N13 B16 A) -125 KW / 170 HP
120 i (N13 B16 A) - 130 kW / 177 HP

BMW 3 Series

3 Series (F30, F80) – 2011–2018

316 i (N13 B16 A) - 100 kW / 136 HP
320 i (B48 B20 A) - 135 kW/184 HP
320 i (N20 B20 A|N20 B20 BIN20 B20 D) - 135 KW / 184 HP
320i xDrive (N20 B20 A|N20 B20 B) - 135 kW/184 HP

3 Series (G20, G80, G28) – 2018–2026

318 i (B48 B20 A) - 115 kW/156 HP

3 Series Gran Turismo (F34) – 2012–2026

320 i (B48 B20 A) - 135 kW/184 HP
320 i (N20 B20 A|N20 B20 B) - 135 KW / 184 HP
320i xDrive (N20 B20 B) - 135 kW / 184 HP

3 Series Touring (F31) – 2012–2019

316 i (N13 B16 A) - 100 kW / 136 HP
320 i (B48 B20 A) - 135 kW / 184 HP
320 i (N20 B20 B) - 135 kW / 184 HP

BMW 4 Series

4 Series Convertible (F33, F83) – 2013–2026

4 Series Coupe (F32, F82) – 2013–2026

420 i (B48 B20 A) - 135 kW / 184 HP
420 i (N20 B20 A|N20 B20 B) - 135 kW/184 HP

4 Series Gran Coupe (F36) – 2014–2026

420 i (B48 B20 A) - 135 kW / 184 HP
420 i (N20 B20 B) - 135 kW / 184 HP

⚠️ Important Fitment Notice

The brake pads must be determined according to the individual vehicle or engine specification.

The model/chassis list above should therefore be used as a fitment guide only. Different brake calipers and brake packages may be fitted to vehicles within the same BMW model range.

For accurate supply, we recommend confirming the VIN before ordering and comparing the required brake-pad dimensions where necessary.

Installation Notes

Brake pads should always be inspected and replaced as part of a complete brake-system assessment. Check the brake discs for minimum thickness, excessive wear, scoring, cracking or heat damage before installing new pads.

Brake caliper guide pins, piston operation, boots and related hardware should also be inspected. Where applicable, replace the brake-pad wear sensor and other recommended fitting accessories.

Brake-system components are safety-critical, so professional installation by a qualified technician is recommended.