Liqui Moly Special Tec F 5W-30 LM2326

Liqui Moly Special Tec F 5W-30 is a high-performance, low-friction engine oil based on synthesis technology, developed particularly for modern Ford engines and other vehicles requiring ACEA A5/B5 or Ford WSS-M2C 913 specifications.

Its formulation provides excellent protection against wear, high shear stability and rapid oil circulation at low temperatures while helping keep the engine clean. Reduced internal friction can contribute to improved fuel economy and lower pollutant emissions.

Special Tec F 5W-30 is suitable for modern petrol and diesel engines, including engines with turbochargers, catalytic converters, multi-valve technology, Valvetronic, charge-air cooling and compatible diesel particulate filter (DPF) systems.

Key Features:

✔ SAE 5W-30 – Provides reliable lubrication across a wide operating temperature range.
✔ Ford WSS-M2C 913-D Approved – Developed for vehicles requiring this Ford specification.
✔ ACEA A5/B5 Approved – Meets ACEA A5 and B5 requirements.
✔ Jaguar Land Rover Approved – Meets JLR specification STJLR.03.5003.
✔ Excellent Wear Protection – Helps protect critical engine components against wear.
✔ High Shear Stability – Maintains dependable lubrication under demanding operating conditions.
✔ Rapid Cold-Start Lubrication – Fast oil delivery at low temperatures helps protect the engine during start-up.
✔ High Engine Cleanliness – Helps prevent deposits and maintain clean internal engine components.
✔ Fuel-Economy Formula – Reduced friction losses can help improve fuel efficiency.
✔ Turbocharger Compatible – Tested for use with turbocharged engines.
✔ Catalytic Converter Compatible – Suitable for vehicles equipped with catalytic converters.
✔ DPF Compatible – Suitable for applicable diesel engines with diesel particulate filters.
✔ Long Oil Change Intervals – Particularly suited to applications requiring extended oil-change intervals when permitted by the vehicle manufacturer.
✔ Petrol & Diesel Engines – Suitable for a wide range of compatible petrol and diesel applications.

Specifications & Approvals:

ACEA: A5 / B5
Ford: WSS-M2C 913-D
Jaguar / Land Rover: STJLR.03.5003

Liqui Moly Recommendations:

Liqui Moly also recommends Special Tec F 5W-30 for applications requiring:

• Fiat 9.55535-G1
• Ford WSS-M2C 913-A
• Ford WSS-M2C 913-B
• Ford WSS-M2C 913-C

Product Specifications:

Brand: Liqui Moly
Product: Special Tec F
Product Type: Low-Friction Engine Oil
Technology: Synthesis Technology
SAE Viscosity: 5W-30
Density at 15°C: 0.855 g/cm³
Viscosity at 40°C: 52.4 mm²/s
Viscosity at 100°C: 9.9 mm²/s
Viscosity Index: 179
CCS at -30°C: ≤ 6,600 mPa·s
MRV at -35°C: < 60,000 mPa·s
HTHS at 150°C: 2.9–3.5 mPa·s
Flash Point: 220°C
Pour Point: -45°C
Noack Evaporation Loss: 12.0%
Total Base Number: 11.1 mg KOH/g
Sulfate Ash: 0.85 g/100g
Colour Number (ASTM): L3.5

Areas of Application:

Special Tec F 5W-30 is particularly suitable for compatible vehicles from manufacturers including:

• Ford
• Jaguar
• Land Rover
• Mazda
• Rover / MG
• Citroën
• Fiat, where the specified requirement matches

It is particularly suited to Ford applications requiring the WSS-M2C 913-A, 913-B, 913-C or 913-D specifications.

Always confirm the required oil specification and viscosity in the vehicle manufacturer's operating instructions before use.

Application:

Follow the vehicle and engine manufacturer's specified oil requirements, oil capacity and service interval.

Do not select engine oil based on viscosity alone. The required manufacturer specification or approval should also match the vehicle's requirements.

Important Notes:

Not Suitable for VW Extended Service Intervals: This product is not suitable for Volkswagen vehicles requiring service interval extension / LongLife oil specifications.

DPF Applications: Although suitable for compatible DPF-equipped engines, always confirm that the vehicle specifically permits the listed ACEA and manufacturer specifications.

Manufacturer Requirements: Always follow the oil specification stated by the vehicle manufacturer.